Open-face redirect pulley

Open-face pulley designed to pull trees perpendicular to the trail when traction is from a vehicle. It can also be used to deviate the path and go around obstacles. When installed high, the angle of pull allows the end of the log to be slightly raised, thus reducing friction on the ground. Made of steel, it is shock resistant. The sheave is smooth and without sharp edges: it will not damage synthetic strings. Its large diameter gives it good efficiency. It can also be used with steel ropes. It can be attached to a tree with a polyester sling.

Practical information:

• Material: steel
• Ø of the pulley: 100 mm
• Ø of the rope: 6 to 12 mm
• Maximum load: 20 kN